Water does not go into the device or cleaning agent is not washed away. Sign light «spin» is lit as well as a display screen is blinking E11.
If the e11 error code shows up on the screen of the Bosch cleaning maker, inspect the adhering to factors:
The tap of the water system to the cleaning machine is blocked.
Low tide stress in the water.
The filter in the hose pipe of the cleaning maker is blocked.
The water supply hose pipe of the washing machine is twisted.
Aquastop ® Pipe safety function is turned on.
Activation of the Aquastop system
The e11 error code of the Bosch washing equipment has actually occurred because of the AquaStop as well as Leak defense system activation
AquaStop and also Leakage security system are necessary to turn off water and also switch off the device. It’s crucial in instances of a rupture of a fill hose pipe or leak inside the cleaning machine
The AquaStop system functions as complies with. The water inlet hose pipe passes through an outside one, which is broader. If the internal hose pipe ruptureds or tears for one reason or another, water won’t stream to the floor, but to the outside tube. Hereafter, the valve at the inlet of the loading hose immediately closes the water.
Such a feature indicates that there is a sensor in the cleaning machine base. If water enters it when leak occurs, the Aquastop system stops the water obtaining. And the electronic control system gives the command to drain it.
In uncommon situations, washing machines, equipped with security versus leaks, reveal dud of the water sensor. Therefore, when the tool is turned on, the drainpipe pump quickly starts working. When this happens, the cleaning process does not start. The reasons for this can be either in the electronic control system or in the sensing unit itself. Among the means to fix the trouble is shutting the cables around the sensing unit.
Just how to clean the water filter in the washing equipment.
Disconnect the cleaning maker from the outlet.
Close water system to ensure that it does not go into the cleaning equipment. If you do not have a different tap for the tool, shut the cold water supply in the entire house. As a rule, the crane is located next to the meters.
Prepare a dustcloth and a tiny container of about one-liter capacity. Relocate the device away from the wall to get accessibility to the hose pipes.
Discover the filler hose as well as begin to turn it anticlockwise. When the tube starts to turn off conveniently, place a dustcloth as well as basin under the hose pipe, and also transform it throughout. Some water will pour out of the component.
Using tweezers or pliers, get rid of the filter as well as wash it under the water. If you are obstructing water in the whole apartment or condo, route the pipe to a tub or sink and ask somebody to switch on the water. After that, water will stream from the hose and you may wash the filter with it. After that, close water system once again.
Mount the filter in the washing device.
Screw the tube back by transforming the inner screw clockwise. Tighten it with tool initiative.
Activate the water as well as check that there is no leakage under the inner screw. If water circulations, after that you have to have screwed the tube not by the thread or tightened it a little. Shut the water, get rid of and also attach the hose again.
If the tube does not leak, turn on the cleaning device.