The e12 mistake code in Bosch washer indicates that the time of waiting on water to enter the washer has actually been gone beyond. Various Bosch washer designs have a different action time as well as errors displaying. Anyhow, as a rule, it is up to 5-6 minutes.
Really frequently in some models of washing machines, the e12 mistake code corresponds the e11 one. For that reason, the like e11 error, the e12 one indicates that the storage tank does not obtain water.
Factors for it:
The tap is closed.
The washing machine water hose is pinched.
The filter inside the water hose pipe is clogged with particles (rust, plaque, and so on).
The AquaStop system (leak protection) is out of order. It offers a dud as well as obstructs the water.
Short circuit in the cords.
Deal with the e12 mistake in the Bosch washer.
Beginning troubleshooting with the simplest approaches. So, inspect if there is water in the pipes as well as if there suffices water stress.
Next, examine the outside of the supply of water tube. If it’s okay, unscrew it from the washer, as well as tidy the inlet part of the filter.
The e12 error brought on by AquaStop activation.
Any AquaStop shutoff will obstruct the water to the washer as well as transform it off for the following reasons:.
There is a rupture of the filler hose connected to the body of the unit. The pipe can additionally break and burst, or be cut with a sharp item.
There is a leak of water inside the body of the tool because of the failing of any type of component.
Often AquaStop demonstrates an incorrect trigger. There is no leak, yet the tool still urgently drains pipes water and also does not start washing. In this situation, check these details for functionating:.
an electronic control device of the washer;.
the sensor of security against water leakage.
Just how to examine the AquaStop securely.
The absolute best option when the system of defense against water leak causes is to detach the washing machine from the keys. Be sure to hand over the AquaStop checking to an experienced repair work technician!
When you begin inspecting the washing machine without expert help, keep in mind the safety guidelines!
It is secure to inspect the AquaStop as complies with:.
With completely dry hands, disconnect the plug of the washer wire from the electric outlet.
Totally close the water system faucet to the unit.
Drain water from the washing machine.
Open up the hatch as well as go out the bed linen.
Check if there is water in the washing machine tray.
The pallet is a steel or plastic container with a water sensing unit mounted in it (a «float» with an electric microswitch).
If the pallet is completely dry, you need to refer to the instructions. Locate the section that describes what to do in case of the «Leakage» mistake.
If there is water on the pallet, not delay the issue. Request help in a trusted and also legitimately functioning service center! In instance of leakage, just the qualified specialist can find the reasons for failing and also repair the thing.