If the cleaning maker shows the DE error code during the «Wash», «Rinse» or «Spin» cycles, after that the door is not locked effectively.
Let’s mean, you’ve got the LG washing maker without a display. Then the signs «Temperature»— «Laundry»— «Rinse» blink (light) at the same time to indicate the mistake.
In this situation, take into consideration the following reasons:
the latch of the lock assembly is malfunctioning;
the cable strap or the springtime runs out area;
the cover actuator of the lock assembly has failed;
the begin button belonging of the control board is defective.
Exactly how to take care of the DE error code in the LG cleaning equipment
Prior to considering the cause of the breakdown and troubleshooting, do the following to clear the DE error code:
Push the door to shut it properly.
Examine the door for a blockage. An item can be captured in it.
If the door is not aligned appropriately, secure the joint securely.
Reboot the system repetitively by unplugging the cleaning maker. After 15-20 minutes, plug the washing machine back in.
Is your LG cleaning equipment obtaining the DE error code once more? Continue analysis as well as obtain what it indicates.
Evidences of breakdown as well as repair work
|Evidences of malfunction||Cause||Solution|
|The door is closed but is not locked.||The latch of the lock assembly has failed.||Replace the part.|
|The door is closed, locked, but the cycle will not start, so you can see the DE error code on the display.||The lock assembly has failed. The door isn’t locked, so the program doesn’t start.||Replace the lock assembly.|
|The DE error is displayed in the middle of a washing, rinsing or spin cycles. The smell of burning is in the air, the indicator “Lock” may light.||The control board malfunctions.||Check the element. If damaged, clean the connectors and solder the contacts. If the board is beyond repair, replace it.|
|The handle will not work, so you cannot close the door. The DE error is displayed.||The handle is broken.||Install a new handle.|
|The door of the LG washing machine will not close due to the old hinges.||The hinge is damaged.||If you can not adjust it, then replace the part.|
If you have actually made all the above stated steps and also the DE error is still with you, make use of the following formula to discover malfunction. The formula was established by the specialists. It suggests first testing the lock assembly. Just how to do it?
Open the door and examine if the lock is undamaged and movable— pull it to the right and also to the left.
If the lock is okay, after that obtain the lock setting up. To get it loosen both screws holding the button inside the equipment.
Take out the switch assembly, however do not separate it and also turn on the maker. Discover the contact on the narrow component of the switch and also complete the circuit.
If the machine does not show mistakes and also you can set the washing cycle despite having an open door, replace or fix the lock setting up.
Consider the factors of malfunction to clear the error. If you are confident the locks function appropriately, take a look at the little board. It is located in the control module as well as changes the LG washing maker on as well as off.
First get rid of the plastic cover covering the control panel, gently prying off a few plastic keeping clips with a screwdriver.
Next off, loosen a few screws holding the control board.
The board consists of 2 components: a big board with a screen as well as a tiny board changing the cleaning device on and also off. We require just the small board.
Get rid of the huge board and placed it aside.
Analyze the tiny board for any noticeable damages (exhaustions, damaged get in touches with, and other points) thoroughly.
If it is harmed, after that it is the source of the DE mistake, as well as we shall handle it. If it is not harmed, speak to the professionals.
Having actually re-installed the board, check if the maker works appropriately. If the mistake is not shown and also the LG machine functions penalty, you did the right thing.