6Е (Eb, bE, bC) mistake indicates concerning the issues in the electronics of Samsung washing makers. Codes differ depending upon the day of the tools manufacturing.
Error codes in old as well as brand-new washing equipments
Until 2007, Samsung cleaning machines revealed the Eb code. Although it is extra appropriate to check out the code as bE, bE1, bE2. In the devices without a digital screen, the issue was suggested by the illumination of chilly water temperature level signs. So, the 40 and also 60 levels icons illuminated at the same time.
A complete list of designations, comparable to the 6E mistake in the washing equipment:
bE with additional figures (bE1, bE2, bE3);.
occasionally the order of letters changes— on Eb;.
in some models, the inscribing bC (or bC2) is utilized.
Causes of malfunctions.
The 6e error signals about the troubles with running the modern technology. There are 3 typical factors when the device reveals the 6E error code:.
thyristor switch is out of order;.
there are problems with the control switches;.
the failing happened in the digital controller of Samsung cleaning equipments.
Before repair, try to clarify in which unit the breakdown took place. If you’re an owner of the washing equipment with the display screen for three characters, this task is much easier for you:.
the bE1 mistake signifies a trouble with the power switch;.
bE2 (b2 or bC2) focuses on troubles with other tricks of the washing device;.
if the bE3 mistake brighten, there is a trouble with the control system.
Exactly how to deal with the 6E mistake code.
6E can show up on a display screen at any kind of phase of the cleaning maker operating. The fault can take place at the start of washing, and right before the end of the process.
When the codes of this group appear, it is rarely possible to get rid of the error without the help of a professional.
Samsung washing makers are geared up with a collection of sensors. Each of them can fall short. To reset the errors, it is enough to reboot the electronic devices. For this, turn off the devices from the network for a couple of mins and turning it on once more.
Socket electrical outlet malfunction.
Interruptions in the current supply can drive the mild Samsung electronics insane. This happens if the plug’s link with the electrical outlet is not tight sufficient.
To remove the mistake, deal with the electrician. For that reason, change the outlet, the plug of the washing machine or repair the circuitry.
Buttons do not perform its functions.
If the equipment issues the 6E error code, probably there is an insufficient call of the buttons or their sticking after pressing.
Attempt holding the key for regarding a minute or press it a few times. The fastening of the front panel of the washing device additionally aids.
Reasons for the mistake.
If you can’t handle the problem yourself, and also the device shows the exact same error on the display, so browse the table below. It will help you to understand the significance of a certain habits of the home appliance.
|Malfunction||Possible reasons||What to do|
|6E (bC) appears after the start of the program. The washing machine turns the drum, as when pressing. The technique starts in the normal mode, but it does not cope with the pressing process. Thus, the technique hangs.||Closing the contacts led to a breakdown of the triac.||It is necessary to replace the unit. Perhaps, you will need to do it along with diodes and relays.|
|The drum of the washing machine spins to the limit. Then, the Eb error appears on the display.||The Hall sensor is broken. As a result, the control triac malfunction occurs.||Provide the tachogenerator diagnostics. In case of insufficient contact, improve the fastening. Also, replace the burnt out part.|
|The washing machine doesn’t start. In a couple of minutes, the 6E error or similar indicator lights up.||The motor relay damage. (As a rule, it occurs after a poor-quality repair, after which the contacts get oxidized or ruined).||Soldering eliminates the problems with the legs or relay contacts. Replace the burnt out part.|
|The 6Е error code periodically lights up.||Insufficient contact between the wires (they are worn out or chafed).||To restore the machine’s operating, inspect the contacts. You need to clean and reconnect them. In difficult cases, you have to replace the plume completely.|