The HE1 error in Samsung cleaning makers is quite an usual one. It can show up at any type of stage of the home appliance’s work. There are not many factors for this mistake. However all the cases represent a significant threat. If the control component stops the method, releasing this mistake, it conserves your tool from a serious failure.
The meaning of the he1 mistake in Samsung cleaning equipments
When it concerns Samsung washing device self-diagnostic system, note the next. Any code starting with the English letter «H» indicates the heating element problems. Succeeding letters as well as numbers specify the sort of problem. In our case, the HE1 mistake implies that the water in the tank heats up greater than 400 ° C in 2 minutes. It indicates that the burner operates up too quickly. The part does this no matter the formulas defined by the cleaning program.
H1 and HE1 mistakes occur in two instances:
the cleaning maker almost boils water heating it to 95 degrees;
water warms up also rapidly (greater than 40 levels for 2 minutes).
If the self-diagnosis system doesn’t stop water heating in such scenario, the heating element will certainly quickly bring it to a boil and burn. Because of this, the boiling water will harm fragile laundry that you potentially place in the drum for washing.
The HE1 error humiliates specialists. So, the heating element is functioning, there is no breakage, however something makes it work incorrectly. That is why the three-digit codes of the self-diagnosis system of Samsung cleaning devices are much better. These codes transfer info about the malfunction extra accurately than two-digit ones. It provides the master the chance to save time on troubleshooting.
Feasible root causes of mistake
What failures cause the HE1 error? There are 2 instances of failures: when the temperature sensing unit falls short as well as when the control board breaks down.
The temperature sensing unit sends out details regarding the heating element activating. By ways of this sensing unit, the control module can change the heating element temperature according to the cleaning program. If the thermal sensor breaks, the control component can not regulate the work of the burner. By default, after the Samsung cleaning maker changing, the gadget starts to warm up to the optimum. The control module does not receive details from the temperature sensing unit for a number of minutes. For that reason, the device immediately switches off the burner. The HE1 mistake shows up. The washer’s procedure stops.
Samsung washing makers manufacturer mounts the temperature level sensing unit directly on the burner. So, it is simple to locate it. But your job is to reach the heating element.
The failure of temperature level sensors in Samsung washing equipments is rather common. But in some cases such a sensor is not the reason for the malfunction. So, what is the cause of the mistake? In this circumstance, the factor for the failure depends on the control module. If the track or triac running the heating element burns, this likewise results in the HE1 fault. Actually, the fixing of this component is harder and also costly.
The warm sensing unit is difficult to fix. The only service is to change it. In order to make certain that the component is out of order, inspect it with a multimeter. Then, give the full replacement.
To examine and replace the temperature level sensing unit, you need to remove the front wall of the Samsung cleaning device. Having actually reached the heating element, do the adhering to.
Detach the cord from the temperature sensing unit, and then draw the part out of the specific niche.
Measure the resistance of the sensing unit with an unique tool called a multimeter. If the device reveals 0 or 1, toss out the failing temperature sensor and put a new one in its area.
After that set up and also check the fixed cleaning maker.
If the temperature sensor is undamaged, there is no worry with its cords and also providing get in touches with, so the matter is in the control component. Professionals advise not to fix the Samsung cleaning equipment control module on your own. You had much better turn over the fixing of the electronic component to an expert.
Summing up, note that the deciphering of the HE1 error in Samsung cleaning machines is fairly easy. But elimination of the break downs that the mistake signals about is hard.