Sometimes Samsung washing machines problem UC, 9C, 9E1, or 9E2 error report electrical energy problems. These codes show up on different Samsung designs and also signal one issue. There can be partial differences carefully.
When does the UC mistake code appear in Samsung cleaning makers
To determine the significance of the UC mistake code, suggest when it appears on screen. The Samsung washing maker creates a mistake:
After the start of cleaning, when the hatch locks, and also you push the beginning switch;
After the first set of water;
After the heating element triggering;
Throughout spinning, when the drum beginnings to spin.
A UC error might appear on display at any other time throughout procedure. The option of the problem depends on the appropriate meaning of the reason.
The definition of the UC mistake code
The UC error suggests power issues. If the cleaning machine faces an increase or decrease in voltage, after that during the washing process it shows an error.
The UC mistake brighten on the cleaning maker screen when the system repairs an uncommon voltage for 30 seconds.
Samsung washing device designs, released prior to 2012, did not react at power rises from 175 to 270 V. Modern versions have ultra-sensitive network filters.
At a temporary power surge, the UC code vanishes by itself. The cleaning maker continues the cleaning program immediately.
Why does the error occur?
When the UC error illuminate on the washing machine display, the reasons for this are:
Breakdowns in the outlet;
Use incorrect or poor-quality extension cable;
Sharp voltage dive;
The voltage in the network is not representing the criterion;
Temporary failing in the control device of the cleaning maker;
Issues in the control component.
If the UC appears, in a lot of cases, you can get rid of the issue yourself.
How to fix the trouble
You can go down the fault by resetting the washing equipment. After that, you have to check whether the fault code reappears. For this you need:
Detach the home appliance by pressing the appropriate button and also taking the cable out of the socket;
Wait 5 mins;
Plug in as well as reactivate the washing machine.
If hereafter, the device functions as well as no more concerns the UC code, so there was a temporary voltage failure. If the code illuminate once more on screen, then you need to seek a factor to take care of the trouble.
To remove the highlighting UC code, you need:
Inspect the electric network as well as its voltage.
Mount the voltage regulatory authority, which allows compensating voltage decreases;
Examine the electrical outlet and also electric wiring for service;
Eliminate the expansion cable (if you link the machine to the network through it) and also connect straight to the outlet. The electrical outlet needs to be protected against dampness to make sure that you do not obtain electrocuted.
If after inspecting, the tool continues to show a power failing, there is a defective control module. Contact a specialist to solve the problem.