|Model||Description||Software Model Number|
|DFUW, DUWC, VUWC||24 inch Wine Cellar||11|
|DFUR, DUAR, VUAR||24 inch Beverage Center||21|
|DFRD, DURD, VURD||24 inch Refrigerated Drawers||16|
Viking Refrigerator Diagnostic Details
Solution Diagnostics Mode enables you to identify the firmware and software program variations, examination standing of «design certain» system parts as well as sensing units, and transform state of components where applicable (i.e.— compressor on/off, and so on.).
Enabling Service Setting: To make it possible for Solution Setting, press and hold the «WARMER» switch while pushing the «COLDER» button four times within five secs.
After getting in Solution Mode, the first number that you will certainly see suggests the software design number for the particular device you are servicing. For instance, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the first number you will see is 11. See chart below for matching model as well as software application referral.
The 2nd number you will see shows the software program version launch. As an example, if you see 44 on the display screen panel it shows software program variation 4.4.
While in Service Setting, press the «SET» button to tip through Examinations 0-9. The first number of the screen will certainly reveal the examination number. The 2nd figure shows the present state of each component under test and also is displayed as «1» being ON, CLOSED, or SHORTED and «0» being OFF or OPEN. Examinations 0 and also 1 expose an open or shorted problem found at the sensor inputs. Examinations 2 with 6 allow you to turn lots ON with the «WARMER» switch and also OFF with the «COLDER» button. Tests 7 through 9 validate state adjustment of the door changes and/or magnetic reed sensing unit. The element examinations offered are explained in Available Part Examinations chart.
|PROBLEM||POSSIBLE CAUSE||WHAT TO DO|
|Produce drawers do no close freely||Contents of drawer or positioning of items in compartments could be obstructing drawer.||Reposition food and containers to avoid interference with the drawers|
|Drawer is not in proper position||Proper placement|
|Drawer channels are dirty or need treatment||Clean drawer channels with warm, soapy water. Rinse dry thoroughly.|
Apply thin layer of
petroleum jelly to drawer channels