Model | Description | Software Model Number |
DFUW, DUWC, VUWC | 24 inch Wine Cellar | 11 |
DFUR, DUAR, VUAR | 24 inch Beverage Center | 21 |
DFRD, DURD, VURD | 24 inch Refrigerated Drawers | 16 |
Viking Refrigerator Diagnostic Information
Solution Diagnostics Setting enables you to recognize the firmware and software application versions, test status of «model particular» system components and also sensors, and transform state of elements where relevant (i.e.— compressor on/off, and so on.).
Enabling Solution Setting: To allow Solution Mode, press and also hold the «WARMER» switch while pressing the «COLDER» switch four times within 5 secs.
After going into Solution Setting, the initial number that you will see suggests the software program version number for the particular device you are servicing. For instance, if you are servicing a 24 inch wine rack (DFUW, DUWC, VUWC), the initial number you will certainly see is 11. See graph below for equivalent model as well as software program referral.
The 2nd number you will certainly see indicates the software application version release. For instance, if you see 44 on the screen panel it shows software program version 4.4.
Diagnostics:
While in Service Setting, press the «COLLECTION» switch to step via Tests 0-9. The first figure of the display will certainly show the examination number. The second digit indicates the current state of each element under test and also is shown as «1» being ON, CLOSED, or SHORTED as well as «0» being OFF or OPEN. Examinations 0 and also 1 disclose an open or shorted problem spotted at the sensor inputs. Examinations 2 through 6 permit you to turn lots ON with the «WARMER» switch and also OFF with the «COLDER» switch. Tests 7 via 9 confirm state change of the door switches over and/or magnetic reed sensing unit. The component tests readily available are described in Available Component Examinations chart.
PROBLEM | POSSIBLE CAUSE | WHAT TO DO |
Produce drawers do no close freely | Contents of drawer or positioning of items in compartments could be obstructing drawer. | Reposition food and containers to avoid interference with the drawers |
Drawer is not in proper position | Proper placement | |
Drawer channels are dirty or need treatment | Clean drawer channels with warm, soapy water. Rinse dry thoroughly. Apply thin layer of petroleum jelly to drawer channels |