|Model||Description||Software Model Number|
|DFUW, DUWC, VUWC||24 inch Wine Cellar||11|
|DFUR, DUAR, VUAR||24 inch Beverage Center||21|
|DFRD, DURD, VURD||24 inch Refrigerated Drawers||16|
Viking Fridge Diagnostic Information
Solution Diagnostics Mode permits you to identify the firmware and also software variations, test status of «version details» system parts as well as sensing units, and transform state of parts where appropriate (i.e.— compressor on/off, and so on.).
Enabling Solution Mode: To allow Service Mode, press and hold the «WARMER» switch while pushing the «COLDER» button 4 times within five seconds.
After going into Service Mode, the very first number that you will certainly see suggests the software application version number for the particular system you are servicing. As an example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the initial number you will certainly see is 11. See chart listed below for equivalent model and software program reference.
The 2nd number you will see suggests the software application variation launch. As an example, if you see 44 on the display screen panel it shows software version 4.4.
While in Service Mode, press the «SET» button to tip through Examinations 0-9. The very first figure of the screen will show the test number. The second figure indicates the existing state of each part under test and also is displayed as «1» getting on, CLOSED, or SHORTED and also «0» being OFF or OPEN. Examinations 0 as well as 1 expose an open or shorted condition detected at the sensing unit inputs. Tests 2 through 6 permit you to transform lots ON with the «WARMER» button and OFF with the «COLDER» switch. Examinations 7 with 9 validate state modification of the door switches over and/or magnetic reed sensor. The element tests readily available are defined in Readily available Part Examinations graph.
|Air rushing or whirring||Freezer fan and condenser fan make this noise while operating.||Normal operation|