|Model||Description||Software Model Number|
|DFUW, DUWC, VUWC||24 inch Wine Cellar||11|
|DFUR, DUAR, VUAR||24 inch Beverage Center||21|
|DFRD, DURD, VURD||24 inch Refrigerated Drawers||16|
Viking Refrigerator Diagnostic Info
Service Diagnostics Setting enables you to recognize the firmware and also software variations, examination status of «version specific» system elements and sensing units, and also change state of elements where relevant (i.e.— compressor on/off, and so on.).
Enabling Solution Setting: To make it possible for Solution Mode, press and hold the «WARMER» switch while pushing the «COLDER» switch four times within 5 seconds.
After entering Solution Mode, the very first number that you will certainly see suggests the software application design number for the particular system you are servicing. For instance, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the initial number you will certainly see is 11. See chart below for corresponding version and also software program recommendation.
The 2nd number you will certainly see shows the software version launch. As an example, if you see 44 on the display panel it shows software application variation 4.4.
While in Service Setting, press the «SET» switch to tip via Tests 0-9. The first digit of the screen will reveal the test number. The second figure indicates the present state of each element under test and is displayed as «1» getting on, CLOSED, or SHORTED and also «0» being OFF or OPEN. Tests 0 and 1 reveal an open or shorted problem identified at the sensor inputs. Tests 2 with 6 permit you to turn lots ON with the «WARMER» switch and OFF with the «COLDER» switch. Examinations 7 through 9 validate state change of the door changes and/or magnetic reed sensing unit. The element examinations available are defined in Available Part Examinations chart.
|Humming||Ice maker is in the ‘on’ position without water connection||Stop sound by raising ice maker arm to OFF position see page 3|