Natural or LP gas rangetop with double convection electric oven( s) — Small 18-inch oven on 48-inch dual fuel array is single convection — Stainless steel exterior surface — Platinum bezel borders all knobs, Chrome and Bronze optional — Alternative of Red or Black knobs — Twin piled secured 15,000 heaters with automatic re-ignition at all setups — Double stacked burners all have simmer capacities — Melt feature on one 9,200 Btu heater — 11″ or 22″ 15,000 BTU (13,000 BTU— LP) Frying pan with Infrared heater( s) and also security shut down system — 11″ or 22″ 16,000 BTU Charbroiler with Infrared burner( s) — 22″ 15,000 BTU French Top heater with safety and security shutoff system — Continual actors iron porcelain top grates — Rotating touch control panel — Coaxial temperature displaying oven knob — Eight cooking settings — Bake Mode — Bake Rock Mode (30″ as well as 36″ dental caries just) — Broil Setting — Convection Mode — Convection Bake Mode — Convection Broil Setting — Convection Roast Setting — Roast Mode — Proof Setting (18″ just) — Self-cleaning stove( s) — Dehydration Function — Proof Attribute (30″ and 36″ cavity) — Delayed Start Function — Probe Function — Sabbath Function — Spring/damper door system — Temperature level probe — Full expansion base rack — Covert bake component — Oven door home windows as well as dual halogen illumination — Blue porcelain stove interior — Flexible stainless steel legs ahead and flexible rear wheels — Optional Bake Rock — High elevation conversion package readily available for devices mounted over 8,000 feet — Two and five year residential service warranty — CSA accredited for United States and Canada
Diagnostic Setting enables the Solution Technician to check the capability of the Stove Controller and also Relay boards. Getting in an essential mix on the display panel will allow the Service technician to get in Analysis Mode. — In Analysis Setting the last seven errors that have actually struck the oven managing all the relays on the relay board and controller feedback of temperature and buttons will certainly be presented. — The Electronic Control Housing will show last error code tape-recorded in the Chef Time digit area, with Quit Time numbers displaying the number that the mistake was recorded, number 1 being the most recent. The software program version will certainly be displayed during Day figures and current oven tooth cavity temperature will certainly be displayed in the display home window of the Oven Temperature Control Knob.
INITIATING DIAGNOSTIC MODE: To initiate Diagnostic Mode, oven control knob bezel must be in the OFF position. Now, press and hold CLOCK key and TIMER key for 3 seconds. (See Figure 3-60)
The ambient cavity temperature will be displayed in the temperature readout knob. Now, turn the oven temperature readout knob to the right seven separate times, this will toggle from error code 1 thru 7. (See Figure 3-62)
To return to error code number one, turn oven temperature readout knob to the left seven separate times. (See Figure 3-63)
The software version will be displayed in the hours and minutes display of the clock. (See Figure 3-64)
KEEP IN MIND:
When diagnostic mode is gotten in, there is a 2 minute break, which is restarted each time a key is pushed. — To clear mistake codes when unit has been fixed, press the CLEAR key. — To exit Diagnostic Mode, press the ENTER key.
Error codes can give an aesthetic as well as distinct alarm. The aesthetic indicator will be «Err» presented in the Chef Time figures and the number or letter of the error code will be presented in the Quit Time numbers of the Electronic Control Housing. The Oven Temperature Readout Handle will certainly likewise reveal «Err» in the display home window. The last 7 errors will certainly be stored in the EEPROM for recall when in diagnostic mode.
TEST / ACTION
Over temperature occurs when the oven reaches a temperature of 630 °F for an unlocked door and 950°F for a locked door
Ohm RTD sensor, replace if defective. If RTD good replace oven controller.