DF30 – DF36 – DF48 – DF60 DF30-3 – DF36-3 – DF48-3 – DF60-3 DF30-4 – DF36-4 – DF48-4 – DF60-4
Wolf Twin Fuel Varieties are manufactured to deal with natural gas or LP gas (Liquid Propane gas). The design/ serial score plate, located under of the control panel setting up just above the stove door on the far right, has information on the sort of gas that need to be utilized. If this info does not agree with the type of gas offered, talk to the local gas vendor.
Gas Manifold Stress
Basic natural gas orifices on the appliance are established for 5″ WC (Water Column Pressure).
Fluid Propane Manifold Stress
The common lp gas orifices on the appliance are set for 10″ WC (Water Column Stress).
Gas Supply Line Size
KEEP IN MIND: A smaller size pipe on long terms might cause not enough gas supply.
Gas Pressure Regulator
To manage as well as keep a consistent gas stress in the gas manifold, Wolf gas appliances must be attached to the gas supply line through a stress regulatory authority. The burner orifices are sized for the pressure supplied by the regulatory authority. Never try to operate a Wolf gas appliance without making use of the proper stress regulator.
Gas Shut-off Valve
The supply line should be outfitted with an approved shut-off valve. This shutoff ought to be found in accordance to all nationwide, regional codes as well as regulations.
Use a brush and also fluid detergent to test all gas links for leakages. Bubbles around links will suggest a leak. If a leak appears, turned off gas valve controls and also readjust connections. After that examine connections again. Clean all the cleaning agent service from the range.
An electronic leakage detector can likewise be made use of to examine for leakages.
NEVER USAGE OPEN BLAZE TO LOOK FOR GAS LEAKAGES. DO NOT USAGE FLUID NEAR SHUTOFF STEMS.
Supply Line Connection:
Cleansing and also Maintenance
|Part Identification||Material||Care Recommendation|
|Burner Pan||Exterior Finish Porcelain Steel||General care: Use a clean cloth or sponge, wipe with warm water and mild detergent. Rinse and dry immediately. Apply protective polish, always in the same direction. Spray degreaser: Removes fingerprints and greasy spatters. Spray on a cloth and wipe surface. Buff dry immediately to avoid streaking. Protective polish: Apply to surface to maintain luster and protect from some food stains Hard water stains: Use white vinegar and water.|
|Burner Cap||Porcelain Enamel (matte finish) Never wipe a warm or hot porcelain surface with a damp sponge; it may cause chipping or crazing (tiny hair-like cracks)||Cool first. Wash in warm water with liquid detergent or mild abrasive cleaners. Foods high in acid or sugar content, such as milk, tomatoes, sauerkraut, fruit juices and pie filling, may pit or craze the surface. Remove as soon as possible. Do not cook the spill on again.|
|Burner Grates||Porcelain-Coated Cast Iron||Remove from cooktop and place on a flat surface near the sink. Non-abrasive cleaners: Hot water and liquid detergent, paste of baking soda and water, plastic pad or sponge. Mild abrasive and abrasive cleaners: Use sparingly.|
|Control Knobs||Metal||General care: Wipe each knob with a damp cloth and mild soap and water; rinse and dry. Never soak or use abrasive cleaners; they will scratch the finish and remove the markings.|
|Spark Igniters||Ceramic||Keep dry. Never spray water or cleaner directly on the igniter. When cleaning around the surface burner, be careful that the cloth does not catch on the igniter and damage it.|
|Blank-Off Plate (If Applicable)||Stainless Steel||Wash with hot water and detergent. Use a soapfilled scouring pad to remove as much cooked-on soil as possible. The plate will turn a metallic blue color due to high heat; this is a permanent change.|
|Charbroiler Frame||Stainless Steel||Remove from the range. Soak in hot water and dish detergent. Wash thoroughly, scrubbing with scouring pad, if needed. Rinse and dry.|
|Grate||Porcelain Coated Cast Iron||When cool, lift off and set in the sink. Pour very hot water over the cooked-on residue. Cover with wet dish towels and pour more hot water over it. Allow the hot, moist conditions time to help loosen the residue. Remove remaining soil with a soapfilled scouring pad. Rinse and dry|
|Igniter||Ceramic||Avoid contact with the igniter; it is fragile and can chip or break.|
|Mesh Screen (If Applicable)||Stainless Steel Wire||Use a wire brush to loosen any charred food particles.|